| STANDARD NIKASIL CYLINDER KIT
up to 87.5mm |
|
| -
Complete Set includes new Cylinders, Pistons, Rings, Forged Steel
Connecting Rods |
$2200.00 |
| |
|
| NIKASIL BIG BORE KIT up to 94mm |
|
| -Complete Set includes cylinders,
Pistons, Rings, Forged Steel Connecting Rods, & Machining of Block & Heads to fit Cylinders |
$2600.00 |
| -
|
|
|
|
| |
|
| 3-PORT
FUEL INJECTION |
|
| -
Comes complete with ECU, Injectors, Throttle body, Fuel Pump w/ Press
reg., Air Cleaner, Wiring, Linkage, Sensors, Distributorless
Ignition, & all Mods |
$2875.00 |
| |
|
|
3-PORT CYLINDER HEAD CONVERSION |
|
| -
Includes port tubes w/FI bosses, Welding, and Machining of Heads |
$475.00 |
| |
|
| INSPECT
HEADS |
|
| -
Disassemble, Clean, Inspect Pair of Heads for Quote |
$75.00 |
| |
|
| BALANCING |
|
| -
Balance rotating assembly: Crankshaft, Rods, Pistons, Balancer, Clutch
assembly |
$130.00 |
| |
|
| HYDRAULIC ROLLER CAMS |
|
| -
Cam only |
$715.00 |
| -
Reverse rotation cam including distributor gears |
$865.00 |
| -
New Cam Gear |
$145.00 |
| -
Press on Cam Gear |
$20.00 |
| |
|
| FURNISH
AND INSTALL 6 VALVE SEATS |
|
| -
140 Intake Seats (Bronze Alloy) Lifetime Guarantee |
$225.00 |
| - 85-180
HP Intake
(Bronze Alloy) Lifetime
Guarantee |
$225.00 |
| - 140 Exhaust Seats
(Tungsten/Carbide)
1 Year
Guarantee |
$185.00 |
| - 85-180
HP Intake or Exhaust (Tungsten/Carbide) 1 Year Guarantee |
$185.00 |
| |
|
| FURNISH AND
INSTALL 12 VALVE GUIDES |
|
| - R&R Guides (Bronze or Steel) |
$120.00 |
| |
|
| |
|
| VALVE & SEAT GRINDING |
|
| -
All, 3 Angle Standard |
$120.00 |
| -
All, Full Radius Hi-Performance |
$155.00 |
| |
|
| CYLINDER HEAD PORTING |
|
| - Stage 1 = Pocket port and polish
chambers |
$180.00 |
| - Stage 2 = 1 + Relieve valves and radius
intake entry (carb.
Pads) |
$305.00 |
| - Stage 3 = 2 + Full port intake and
exhaust with race finish |
$440.00 |
| - Stage 4 = 3 + Flow sheet on 1 cylinder
and CC all
chambers |
$500.00 |
| - Stage
5 = 3 + Flow all cylinders |
$750.00 |
| |
|
|
CRANKSHAFT |
|
| -
Clean and Magnaflux |
$40.00 |
| -
Chamfer Oil Holes |
$35.00 |
| -
Grind |
$50.00 |
| -
MicroPolish |
$30.00 |
| -
Stress Relieve / Debur Crank |
$475.00 |
| -
Shot Peen |
$45.00 |
| -
Nitriding |
$185.00 |
| -
Machine and Pin Crank Gear |
$140.00 |
| |
|
| OTHER MACHINING SERVICES |
|
| -
Angle Exhaust (110 or 140) |
$200.00 |
| - 1-1/2" S/S Exhaust Stubs Installed |
$155.00 |
| -
Renew Head Gasket Surfaces (Pair), Welding extra |
$100.00 |
| -
Increase Cylinder Bore Diameter in Heads From EM to LM (Pair) |
$75.00 |
| -
Machine for Compression Ratio Increase (Includes CC'ing) (Pair) |
$150.00 |
| -
Spark
Plug Thread Repair (Cost per insert) |
$15.00 |
| - Machine
Valve Guides To Accept
Positive Viton Stem Seals(includes seals) |
$50.00 |
| |
|
|
- Welding - Per Cylinder |
$25.00 |
|
- Clylinder Head Deflashing(Pair) |
$85.00 |
